Structural Iron and Steel Workers

**Description**

**About Austin Industrial**

Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of 4,000 employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost-efficiency.

**Scaffold Builder - Leadman**

This person will supervise in the construction, assembly, maintenance, and dismantling of tubular scaffolding or other temporary structures. Other duties may be assigned.

Scaffold Builder - Leadman

Specific Duties and Responsibilities:

+ Work at heights with no fear.

+ Determines type of scaffold needed and how to properly instruct on how to install.

+ Oversight of transport tubular scaffold or other structural material and erects the scaffold as instructed by the scaffold builder.

+ Hoists scaffolding materials upward in order to erect temporary structure.

+ Properly secures and levels locking sections of scaffolding material.

+ Properly secures scaffold to the permanent structure for added stability.

+ Adheres to all OSHA, site specific and Austin Industrial requirements for the erecting and navigation of the scaffolding.

+ Supervises the dismantling of scaffolding when it has been properly communicated to do so.

+ Inspects and properly stows scaffolding material after dismantling.

+ Performs final inspection of completed scaffolding.

+ Other duties as assigned.

+ Applicants must be legally authorized to work for ANY employer in the United States. Austin Industries is unable to sponsor or take over sponsorship of an employment visa for this position.

**Benefits & Compensation**

We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to https://www.austin-ind.com/our-company/100-employee-owned .

**Physical Demands -** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

**Scaffold Builder - Leadman**

Qualifications Required for this Position:

**Education** – no minimum education requirements.

**Experience** – 3-5 years of Journeyman level experience.

**Austin Industries is an Equal Opportunity Employer.**

_See_ the “Know Your Rights” poster available in English (https://www.eeoc.gov/sites/default/files/2022-10/22-088\_EEOC\_KnowYourRights\_10\_20.pdf) and Spanish (https://www.eeoc.gov/sites/default/files/2022-10/22-088\_EEOC\_KnowYourRightsSp\_10\_20.pdf) .

**About Austin Industries**

Austin Industries and its operating companies engage in almost every type of civil, commercial and industrial construction. Austin is owned entirely by its employees through its Employee Stock Ownership Plan (ESOP). Austin Industries has a rich history. We are one of the largest and most diversified construction firms in the nation. Austin stands on the core values of Uncompromising Integrity, Employee-ownership, Exemplary Service and Excellence in Safety.

To learn more about our history, culture and operations, visit us at www.austin-ind.com .

**No Third-Party Inquiries Please**

This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement).

Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company.

**Accessibility Note**

If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at **(877) 831-1217.**

Equal Opportunity Employer

This employer is required to notify all applicants of their rights pursuant to federal employment laws.

For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.

**Requisition ID: 172898**

Jet Pipe Industries Co., a subsidiary of Kiewit Corporation, is a one-stop shop for fire protection contractors. Jet Pipe is a full line distributor and fabricator for both commercial and residential fire protection systems. Our commitment to customer satisfaction includes trained and dedicated employees, state-of-the-art fabrication equipment, on-site delivery, and a variety of resale products.

**Position Summary**

Work with various welding machines and equipment as a part of a welding assembly line. Operate welding equipment for end prep of pipe using techniques such as Stick, Mig, Wire, Air Arc, Trackwork, and Plasma

**Experience Level**

**Primary Responsibilities and Duties**

• Operates, preps, and sets various welding machines which includes Robot, NAP, and Cypress.

• Works on will-call orders to layout specifications

• Handles pipes and materials weighing up to 50 lbs; at times lifting repetitively and/or shuffling materials down an assembly line onto a layout table, welding stand, or cart/dolly

• Performs air pressure test and visual inspections on welded piping to assure quality products

• Uses basic reading and writing skills to interpret layout plans and labels

• Works in a warehouse environment in hot and cold weather conditions, and with exposure to sparks and glares

**Qualifications**

•May require a high school diploma or its equivalent with previous years of experience in the field or in a related area.

•Must possess working knowledge skills and abilities for position and at least 1 year of basic welding experience

•Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision.

•Ability to use hand tools, power tools and layout tools safe and efficiently.

**Requirements**

•Able to meet all physical requirements.

•Must have all required tools

•Able to work outdoors/inside of a warehouse in all weather conditions and be exposed to sparks and glares

•Able to work overtime and weekends as required by the workload

•Observe and comply with all safety and project rules. Performs other duties as required

•All candidates offered a position must successfully pass a pre-employment drug screen

Equal Opportunity Employer, including disability and protected veteran status.

Company: Jet-Pipe

**Description**

**Tradesmen International** is immediately hiring experienced **Flat Welders** for projects located in **Tipton, IA** . This is a first shift opportunity and the pay rate is **$24-27/hour** based on experience and skill level. If you are a Welder eager to master your skills while working alongside our accomplished Craft Professionals, this is your chance to advance your career!

**Job Scope:**

+ MIG welding using metal cored wire

+ Cutting material using acetylene and/or plasma torch

+ Drill, grind and fit parts per blueprints

+ Forklift operation

+ Moving materials

**Requirements**

+ Must be dependable and show up daily

+ Minimum of 2 years’ experience in structural steel welding from blueprints

+ D1.1 certification preferred

+ Must pass a vertical and overhead tack test on 1/2” plate

+ Must pass a 2G weld test on 1” plate and be certified within the first week

**Company Details**

Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry.

Our comprehensive benefits include:

+ Tradesmen+ Rewards Program – earn points for hours worked

+ Vacation Pay

+ Health insurance

+ 401(k) profit-sharing savings plan

Find our app **, TradeGig** , in the App store to see opportunities, set notifications and click to express interest!

Tradesmen International is an EO employer - M/F/Veteran/Disability

Click here to visit Tradesmen’s full website. (http://www.tradesmeninternational.com)

**Recruiter Name**

Stephanie Campbell

**Location**

US-AZ-PHOENIX

**Posted Date** _43 minutes ago_ _(7/29/2025 7:03 PM)_

**_Req ID_** _2025-363213_

**_Category_** _Welder - Welder_

**_Travel_** _No_

**_Location_** _US-AZ-PHOENIX_

All Things Metal is a structural and miscellaneous steel fabricator and erector located in Phoenix, Arizona. We are seeking a dedicated fitter/welder to join our fabrication shop for a full-time, Monday-Friday position. We are only interested in skilled professionals who can produce efficiently and meet required deadlines.

All Things Metal is a fast-paced environment with an existing culture in a challenging industry. We are looking for fitter/welders to help take us to the next level and that are here to stay. This isn't a temporary position where you'll be laid off in a couple months after you complete a job. You will have a minimum of 40 hours per week.

All Things Metal is built by positive, hardworking self-starters. That kind of spark creates an undeniable energy we appreciate and embrace. It keeps the work and the team moving forward and improving. At the same time, we’re fueled by humility. Our team knows when to listen, when to adapt, and when to agree to disagree.

Responsibilities –

+ Accurately Layout & Fit-up of steel per shop drawings

+ Properly setup welding machine/wire feeder for welding - and adjust settings as required during welding

+ Verify and ensure fit-up of full penetration welds comply with plans, AWS D1.1, and welding requirements, and quality control

+ Ability to read and properly interpret shop drawings

+ Ability to perform welds per AWS D1.1 specification.

+ Perform clean welds with no inclusions, undercut, porosity.

+ Cleaning of all slag/splatter from welds and surrounding area

+ Ensure equipment used is properly maintained/stored during/after use

+ Grinding/Cleaning/Beveling fit-up of welds where required

Advantages, but not required:

+ MIG Welding with solid core gas-shielded wire (Light welding of railings/misc. steel)

+ Ability to weld mild steel over 1-1/2" thickness

Requirements -

+ 3-5 years’ experience in structural steel Fitting, layout, and welding using the Flux Cored welding process

+ Candidate must be able to read and interpret shop drawings & plans.

+ Candidate should be safety oriented (OSHA 10 or OSHA 30 a plus)

+ A team player, punctual, and motivated

+ Applicant must pass in-shop layout/fit-up test.

+ Must be able to bring your welding hood/gloves/jacket as you will be given a fillet test to ensure proper tack welding abilities as well.

+ Valid Identification

+ Background test and drug screening will be done prior to hire

Fitter/welders must be physically able to:

+ Lift and carry objects weighing more than 50 lbs.

+ Stoop, kneel, crawl, lay, bend, squat, stand and walk for long periods of time

+ Work outdoors in all weather conditions

Benefits:

+ $19.00-$24.00 an hour depending on experience, with opportunity for advancement after the first 90 days

+ Full benefits including PTO/ Sick time

+ First- Time home buyer incentive with optional home buying references and a $500 bonus

+ Dave Ramsey’s SmartDollar Budget & Financial Education Library

+ Additional company-wide giveaways

+ 401K plan

+ Family friendly culture events

+ Birthday and Work Anniversary perks

If you've read this far and think this sounds like a good fit for you, apply today and you'll hear from us soon! Please ensure a valid email is on file because that is how you will hear from us after you apply. We look forward to speaking with you!

Job Type: Full-time

Salary: DOE

Benefits:

+ 401(k)

+ Dental insurance

+ Flexible spending account

+ Health insurance

+ Health savings account

+ Paid time off

+ Referral program

+ Vision insurance

Experience level:

+ 3 years

Shift:

+ Day shift

Weekly day range:

+ Monday to Friday, weekends required as needed to fulfill production needs.

Work setting:

+ Outdoor work

Ability to commute/relocate:

+ Phoenix, AZ 85024: Reliably commute or planning to relocate before starting work (Preferred)

Experience:

+ Welding: 3 years (Preferred)

Work Location: In person

#cm

Powered by JazzHR

**Job Title: Structural Welder**

**Job Description**

We are seeking a skilled Structural Steel Welder to join our team. The ideal candidate will be responsible for welding and fabricating structural steel components for various construction and industrial projects. This role requires experience in welding techniques, blueprint reading, and adherence to safety standards.

**Responsibilities**

+ Use 3/32 and 0.45 wire to weld and fabricate structural steel components, including beams, columns, and girders.

+ Read and interpret blueprints, schematics, and welding symbols to ensure accurate assembly.

+ Operate welding equipment such as MIG, TIG, and stick welders.

+ Cut and shape metal using plasma cutters, grinders, and other shop tools.

+ Inspect completed welds for quality and compliance with specifications.

+ Collaborate with engineers, fabricators, and construction teams to meet project goals.

+ Maintain and troubleshoot welding equipment to ensure optimal performance.

+ Follow safety protocols and industry standards to prevent accidents and injuries.

+ Perform post-welding activities such as grinding, cleaning, and polishing.

**Essential Skills**

+ Proven experience in structural welding and metal fabrication.

+ Proficiency in MIG and stick welding techniques using 3/32 and 0.45 wire.

+ Ability to read and interpret blueprints and technical drawings.

+ Strong attention to detail and problem-solving skills.

+ Physical stamina and ability to work in challenging environments, including heights.

**Additional Skills & Qualifications**

+ Experience with oxy-acetylene torch and power tools common in a welding shop.

+ Knowledge of flux core welding and fitting techniques.

**Why Work Here?**

Join a dynamic and rewarding environment where you can become an owner after one full year of employment. Enjoy profit sharing based on divisional profitability and a 401k with company matching. Benefit from subsidized medical, dental, and vision plans, discounted premiums for completing annual physicals and no tobacco use, and company-paid life insurance. Take advantage of the opportunity to purchase additional life insurance at company-subsidized rates. Our team celebrates success with camelbacks in the summer, periodic shop events, T-shirts, and merchandise, as well as a boot voucher for your convenience. Employee ownership with a yearly payout in February based on company performance ensures your hard work is recognized and rewarded.

**Work Environment**

Experience working both outside and inside a large structural steel production facility in El Mirage, AZ. The facility is equipped with swamp coolers and fans for somewhat climate-controlled conditions. It is organized and continuously adding new lines and equipment to enhance productivity.

**Job Type & Location**

This is a Contract to Hire position based out of El Mirage, Arizona.

**Pay and Benefits**

The pay range for this position is $22.00 - $25.00/hr.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:

• Medical, dental & vision

• Critical Illness, Accident, and Hospital

• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available

• Life Insurance (Voluntary Life & AD&D for the employee and dependents)

• Short and long-term disability

• Health Spending Account (HSA)

• Transportation benefits

• Employee Assistance Program

• Time Off/Leave (PTO, Vacation or Sick Leave)

**Workplace Type**

This is a fully onsite position in El Mirage,AZ.

**Application Deadline**

This position is anticipated to close on Aug 7, 2025.

**About Aerotek:**

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Resolute Performance Iron is currently looking for structural fitters. General responsibilities and qualifications listed below.

Shop Fitter/Welder Scope and Responsibilities

+ Use MIG welding equipment to manufacture parts and assemblies in accordance with AISC and job specific standards.

+ Supply quality parts and assemblies from jigs and fixtures for the welders to complete.

+ Work on special projects as required.

+ Support QC by taking feedback into their work and making the necessary changes for a quality product.

+ Operate necessary equipment to perform tasks – includes but not limited to cranes, forklifts, mag drills, torches, hand tools, power tools, etc.

+ Arrange parts and pass along important information to welders.

+ Review fabricated assemblies for accuracy against drawings.

+ Participate and attend safety and company meetings.

+ Perform other duties as required by your manager.

Qualifications

+ Minimum 2 years of experience fitting/welding.

+ Familiar with jigs and fixtures. Familiar with hand and power tools.

+ The ability to read blueprints/engineered drawings.

+ Able to lift and carry 50lbs without assistance.

+ Must pass a drug test and weld test.

Powered by JazzHR

Empire technicians are the lifeline to our clients - trained professionals who work on machinery and equipment produced by Caterpillar, one of the leading large-scale mobile machinery manufacturers in the world.
We are seeking seasoned shop and field technicians/mechanics with experience in similar heavy equipment dealerships to join our third-generation, family-owned organization. We have 100+ job openings throughout our 30+ locations in Arizona, Nevada, and parts of Eastern California.
Join our team today!
EXPERIENCE:
Required:

* At least six months of related experience in a similar role and environment.
* Ability to speak, read, write, and comprehend English.
* Keep safety as a priority in the work environment.
* Ability to successfully complete a skills assessment. (eTRAIN test)
* Valid driver's license.
* Excellent client service skills.
* Own and maintain required personal tools.

Strongly Preferred:

* At least five years heavy equipment technician experience, preferably in a dealership environment.
* Caterpillar work experience.

* Proficient rebuilding/repairing machinery, line boring, welding and warranty claims procedures...

If offered employment, the specific rate of pay and position grade will be determined based on applicable differentials and the candidate's level of experience and skill.
JOB DETAILS:
Shift
2nd / Night Shift
Location
Safford Mine Site
Schedule
7 on 7 off
Salary Range
$21.20 - $67.08 Per Hour
JOB SUMMARY:
Repair and/or rebuild structurally failed or worn parts requiring welding process reconstruction. Work in adverse weather and other adverse shop and field situations presented by client needs. Accept all out-of-town assignments requiring overnight stays. Communicate orally and in writing information, instructions, and explanations to associates, clients, and management regarding conditions, problems, and recommendations.
ESSENTIAL FUNCTIONS:

* Fabricate and/or repair metal parts.
* Comprehend and interpret sketches and diagrams.
* Operate welding equipment.
* Prepare service reports.
* Plan and control cost of repair jobs.
* Maintain company equipment - keep in good clean orderly condition.
* Work safely at all times. Adhere to all applicable safety policies. Comply with all company policies, procedures, and standards.

ADDITIONAL RESPONSIBILITIES:

* Own and maintain required personal tools.
* Learn and use Empire, Caterpillar and allied product procedures and systems.
* Maintain current MSHA card if work area requires.
* Provide on-the-job training to technicians and helpers as assigned.
* Communicate with proper individuals to clarify instructions or discuss scope or progress of job.
* Work overtime as needed.
* Travel to remote locations as needed.
* Perform other related duties as assigned.
* Work within and promote corporate values.

KNOWLEDGE SKILLS AND ABILITIES:

* Perform complex and innovative welding procedures.
* Appropriate manner, conduct, and grooming adhere to company policy.
* Ability to work cooperatively and communicate effectively.
* Able to read and correctly interpret diagrams & blueprints.
* Basic knowledge of heat stresses in metal.
* Know proper use of cleaners and solvents.
* Must have acceptable attendance to meet all company standards and requirements.

EDUCATION AND EXPERIENCE:

* High school diploma or General Education Degree (GED).
* Current driver's license.
* Minimum of 6 months related experience.
* Current AWS D1.1 and D14.3 certification.
* Must be able to communicate (speak, read, comprehend, write) in English.

PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

* While performing the duties of this job, the employee is regularly required to sit, use hands, and talk or hear.
* The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop and kneel.
* The employee is regularly required to lift and/or move up to 25 pounds and occasionally required to lift and/or move up to 50 pounds.
* Specific vision abilities required by this job include close, distance, and peripheral vision.
* May be required to operate a forklift with appropriate certification(s).
* Will be required to wear respirator and be cleared for respirator use by an approved medical provider.
* This position is designated as a "Safety-Sensitive Position". A Safety-Sensitive Position includes tasks or duties that EMPIRE in good faith believes could affect the safety or health of the employee performing the task or others.

WORK ENVIRONMENT:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

* While performing the duties of this job, the employee is regularly exposed to moving mechanical parts; high, precarious places, and outside weather conditions.
* The employee is frequently exposed to wet and/or humid conditions, extreme cold, and extreme heat.
* The noise level in the work environment is usually loud.

JOB SUMMARY:
Repair, recondition, weld, fabricate, service and prepare CAT and other Empire line allied machines and components for delivery. Diagnose and troubleshoot malfunctions and failures of machines, engines, machine systems and components. Work in adverse weather and other adverse situations presented by field working conditions. Accept all out-of-town assignments requiring extended overnight stays. Provide on-the-job training to helpers as assigned. Communicate, orally and in writing, information, instructions, and explanations to associates, clients and management regarding equipment conditions, problems, and recommendations.
ESSENTIAL FUNCTIONS :

* Diagnose and troubleshoot equipment malfunctions, metallurgical and stress failures. Ask for assistance in cases where the diagnosis has not been made within four hours.
* Eliminate or recommend action to eliminate the source of the problem.
* Prepare inspection and appraisal reports.
* Comprehend and interpret sketches and diagrams including engineering drawings and blueprints.
* Plan and control repair jobs. Analyze client requirements and determine the scope of work.
* In advance of a service trip, arrange to take parts, tools, proper size welding rod or wire, technical publications and other material required to complete the job.
* At the job site, organize the job sequence, and arrange with the dispatcher for all sublet or component rework required. Direct and coordinate the work of assigned helpers to minimize waiting, idle time, and inefficiencies. Monitor and control job progress.
* Repair, recondition, weld, fabricate, and maintain equipment and components.
* Prepare equipment for delivery. Remove and install components and parts. Disassemble and reassemble components.
* Determine parts reusability in accordance with published reusability guidelines. Order replacements and arrange for repairs.
* Service and maintain equipment (preventive maintenance), adjust (tune up), and test mechanical, electrical and hydraulic systems, and components.
* Operate welding equipment. Perform arc welding, air arc, gas welding and cutting in vertical up, flat and overhead positions using correct temperatures and procedures for the type of material being welded.
* Works safely at all times. Adheres to all applicable safety policies. Complies with all company policies, procedures, and standards.

ADDITIONAL RESPONSIBILITIES:

* Learn and use Empire and CAT procedures and systems.
* Prepare Service Reports.
* Maintain company equipment. Report repair or replacement needs to the supervisor.
* Make warranty recommendations to supervision via job closing questionnaire.
* Maintain good client relations. Assist the client in making repair or replacement decisions. Explain the causes of equipment operating difficulties and failures to clients and the corrective action necessary to prevent them. Handle all client concerns with tact and diplomacy.
* Works within and promotes corporate values.

KNOWLEDGE SKILLS AND ABILITIES :

* Demonstrated technical skill competence.
* Knowledge and skills to operate and understand diagnostic equipment including computerized instrumentation.
* Appropriate manner, conduct, and grooming adhere to company policy.
* Ability to work cooperatively and communicate effectively.
* Ability to obtain CDL.
* Knowledge of CAT machine components and systems.
* Must be able to meet all safety requirements for applicable safety policies and use of all required safety equipment.
* Ability to maintain consistent attendance.

EDUCATION AND EXPERIENCE:

* High school diploma or General Education Degree (GED).
* Current driver's license.
* Minimum of 6 months related experience.
* Completion of TRAIN test evaluation.
* Proof of current valid CDL if required by position.
* Must be able to communicate (speak, read, comprehend, write) in English.

PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

* While performing the duties of this job, the employee is regularly required to sit, use hands and talk or hear.
* The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop and kneel.
* The employee is regularly required to lift and/or move up to 25 pounds and occasionally required to lift and/or move up to 50 pounds.
* Will be required to wear respirator and be cleared for respirator use by an approved medical provider.
* Specific vision abilities required by this job include close, distance, and peripheral vision.
* As part of the duties of this position, will be required to drive.
* May be required to operate a forklift with appropriate certification(s).
* This position is designated as a "Safety-Sensitive Position". A Safety-Sensitive Position includes tasks or duties that EMPIRE in good faith believes could affect the safety or health of the employee performing the task or others.

WORK ENVIRONMENT:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

* While performing the duties of this job, the employee is regularly exposed to moving mechanical parts; high, precarious places; and outside weather conditions.
* The employee is frequently exposed to wet and/or humid conditions, extreme cold, and extreme heat.
* The noise level in the work environment is usually loud.

We are looking for self-motivated and safety-conscious candidates who would like to join our production team!

New employees can earn 60K in total compensation when working at Canam Steel Corp for a 40-50 hour work week. This includes the base rate, shift differential, overtime, retention and production bonuses.

There are additional ways to earn including referral bonuses and mentoring incentives.

Position is full-time with benefits!

2nd Shift

8 hour shift schedule: Monday-Friday 2:00pm-10:30pm

9 hour shift schedule:
Monday - Thursday Night shift - 3pm - 12:30pm
Friday Night shift - 2pm to 10:30pm
Mandatory alternating Saturdays Night shift - 2pm to 10:30pm

*Must be able to work all shift schedules

Performs welding operations and related tasks such as gathering required parts, setting up materials for welding and welding joist products.

* Performs production welding in a fast paced environment.
* Read and interpret weld symbols on shop drawings and blueprints.
* Ensures that all welds are complete and of good quality; repair bad welds as necessary.
* Maintains a positive, clean and orderly work environment.
* Performs daily cleaning and maintenance of area.
* Works in a safe and productive manner.
* Performs other job-related duties as assigned by supervisor including but not limited to; cleaning, steel scrap removal, and other production related jobs.

* High School diploma or general education degree (GED).
* One to three years of experience and/or training, or equivalent combination of education and experience.
* Ability to apply common sense understanding to carry out written and oral instructions.

Physical Requirements

* The ability to stand continuously, walk, use hands and fingers to handle or feel objects, tools, or controls.
* Frequently reach overhead with hands and arms; stoop, kneel, bend crouch, or crawl.
* Climb or balance frequently.
* Capable of lifting 60 lbs or more
* Close vision, distant vision, peripheral vision, depth perception and the ability to adjust focus

Work Environment

* Open shop environment -- may be exposed to cold and hot work spaces.
* Regularly exposed to fumes or airborne particles.
* Noise in the work environment is generally very loud.

PPEs Required

The following PPEs will be required to be worn at all times:

* Hard hat
* Metatarsal safety boots
* Safety glasses
* ear plugs
* Welding shield
* Supplied air hood
* Welding jacket
* Welding gloves

**Job Title: Structural Welder**

**Job Description**

We are seeking a skilled Structural Steel Welder to join our team. The ideal candidate will be responsible for welding and fabricating structural steel components for various construction and industrial projects. This role requires experience in welding techniques, blueprint reading, and adherence to safety standards.

**Responsibilities**

+ Use 3/32 and 0.45 wire to weld and fabricate structural steel components, including beams, columns, and girders.

+ Read and interpret blueprints, schematics, and welding symbols to ensure accurate assembly.

+ Operate welding equipment such as MIG, TIG, and stick welders.

+ Cut and shape metal using plasma cutters, grinders, and other shop tools.

+ Inspect completed welds for quality and compliance with specifications.

+ Collaborate with engineers, fabricators, and construction teams to meet project goals.

+ Maintain and troubleshoot welding equipment to ensure optimal performance.

+ Follow safety protocols and industry standards to prevent accidents and injuries.

+ Perform post-welding activities such as grinding, cleaning, and polishing.

**Essential Skills**

+ Proven experience in structural welding and metal fabrication.

+ Proficiency in MIG and stick welding techniques using 3/32 and 0.45 wire.

+ Ability to read and interpret blueprints and technical drawings.

+ Strong attention to detail and problem-solving skills.

+ Physical stamina and ability to work in challenging environments, including heights.

**Additional Skills & Qualifications**

+ Experience with oxy-acetylene torch and power tools common in a welding shop.

+ Knowledge of flux core welding and fitting techniques.

**Why Work Here?**

Join a dynamic and rewarding environment where you can become an owner after one full year of employment. Enjoy profit sharing based on divisional profitability and a 401k with company matching. Benefit from subsidized medical, dental, and vision plans, discounted premiums for completing annual physicals and no tobacco use, and company-paid life insurance. Take advantage of the opportunity to purchase additional life insurance at company-subsidized rates. Our team celebrates success with camelbacks in the summer, periodic shop events, T-shirts, and merchandise, as well as a boot voucher for your convenience. Employee ownership with a yearly payout in February based on company performance ensures your hard work is recognized and rewarded.

**Work Environment**

Experience working both outside and inside a large structural steel production facility in El Mirage, AZ. The facility is equipped with swamp coolers and fans for somewhat climate-controlled conditions. It is organized and continuously adding new lines and equipment to enhance productivity.

**Job Type & Location**

This is a Contract to Hire position based out of El Mirage, Arizona.

**Pay and Benefits**

The pay range for this position is $22.00 - $25.00/hr.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:

• Medical, dental & vision

• Critical Illness, Accident, and Hospital

• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available

• Life Insurance (Voluntary Life & AD&D for the employee and dependents)

• Short and long-term disability

• Health Spending Account (HSA)

• Transportation benefits

• Employee Assistance Program

• Time Off/Leave (PTO, Vacation or Sick Leave)

**Workplace Type**

This is a fully onsite position in El Mirage,AZ.

**Application Deadline**

This position is anticipated to close on Jul 31, 2025.

**About Aerotek:**

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

**Job Title: Structural Welder**

**Job Description**

We are seeking a skilled Structural Steel Welder to join our team. The ideal candidate will be responsible for welding and fabricating structural steel components for various construction and industrial projects. This role requires experience in welding techniques, blueprint reading, and adherence to safety standards.

**Responsibilities**

+ Use 3/32 and 0.45 wire to weld and fabricate structural steel components, including beams, columns, and girders.

+ Read and interpret blueprints, schematics, and welding symbols to ensure accurate assembly.

+ Operate welding equipment such as MIG, TIG, and stick welders.

+ Cut and shape metal using plasma cutters, grinders, and other shop tools.

+ Inspect completed welds for quality and compliance with specifications.

+ Collaborate with engineers, fabricators, and construction teams to meet project goals.

+ Maintain and troubleshoot welding equipment to ensure optimal performance.

+ Follow safety protocols and industry standards to prevent accidents and injuries.

+ Perform post-welding activities such as grinding, cleaning, and polishing.

**Essential Skills**

+ Proven experience in structural welding and metal fabrication.

+ Proficiency in MIG and stick welding techniques using 3/32 and 0.45 wire.

+ Ability to read and interpret blueprints and technical drawings.

+ Strong attention to detail and problem-solving skills.

+ Physical stamina and ability to work in challenging environments, including heights.

**Additional Skills & Qualifications**

+ Experience with oxy-acetylene torch and power tools common in a welding shop.

+ Knowledge of flux core welding and fitting techniques.

**Why Work Here?**

Join a dynamic and rewarding environment where you can become an owner after one full year of employment. Enjoy profit sharing based on divisional profitability and a 401k with company matching. Benefit from subsidized medical, dental, and vision plans, discounted premiums for completing annual physicals and no tobacco use, and company-paid life insurance. Take advantage of the opportunity to purchase additional life insurance at company-subsidized rates. Our team celebrates success with camelbacks in the summer, periodic shop events, T-shirts, and merchandise, as well as a boot voucher for your convenience. Employee ownership with a yearly payout in February based on company performance ensures your hard work is recognized and rewarded.

**Work Environment**

Experience working both outside and inside a large structural steel production facility in El Mirage, AZ. The facility is equipped with swamp coolers and fans for somewhat climate-controlled conditions. It is organized and continuously adding new lines and equipment to enhance productivity.

**Job Type & Location**

This is a Contract to Hire position based out of El Mirage, Arizona.

**Pay and Benefits**

The pay range for this position is $22.00 - $25.00/hr.

Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:

• Medical, dental & vision

• Critical Illness, Accident, and Hospital

• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available

• Life Insurance (Voluntary Life & AD&D for the employee and dependents)

• Short and long-term disability

• Health Spending Account (HSA)

• Transportation benefits

• Employee Assistance Program

• Time Off/Leave (PTO, Vacation or Sick Leave)

**Workplace Type**

This is a fully onsite position in El Mirage,AZ.

**Application Deadline**

This position is anticipated to close on Aug 8, 2025.

**About Aerotek:**

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.

Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.